ARAI Yellow/Black M Street Full Face VX-Pro4 Scoop Helmet 886569

Description

PLEASE READ BEFORE PLACING AN ORDER:
1. PLEASE LEAVE YOUR FITMENT INFO AT CHECKOUT.
Even if Ebay’s fitment says this item fits your application, please confirm fitment by providing us with your exact year, make and model during checkout as Ebay’s info can often be wrong. (Click on “message to seller” under the ship to address.) Please keep in mind that your order may not ship out until we receive this information.
2. SOME IMAGES ARE STOCK PHOTOS
They might not accurately represent the item you are purchasing.
3. WE DO NOT DROP-SHIP THIS ITEM to PO BOXES, APO, PUERTO RICO, ALASKA, HAWAII, GUAM or VIRIGIN ISLAND ADDRESSES.
We will request a physical street address within the contiguous US and issue a full refund if we do not receive a revised address by the end of the day.
More info regarding our policies can be found below the listing information.
ARAI
VX-Pro4 Scoop Helmet - M Yellow/Black
Part Number: 886569
The peak of this helmet is 14mm longer and 5mm wider than the VX-PRO3. Larger relief ports allow more air to escape from under the larger peak to minimize lift/pulling at speed. The chin vent incorporates expanded SS mesh that is moved from the inside to the outside of the shell, providing room to move the EPS chin liner forward to allow more room in the face area. The chin vent has a round and smooth mesh cap to resist snagging and digging and is easily removable with a single screw, that will breakaway, if necessary, in an impact. The Inner Mud Gate can be easily removed for more airflow. The liner components feature FCS cheek pads that have a larger surface area, wrapping under the jaw for more comfort. A removable, replaceable, washable neck roll pad, and 5mm peel away cheek pads and temple pads. The ventilation consists of six upper vents, an upper and lower rear exhaust vent cowl, designed to increase airflow and vacuum exhaust, vents designed to assist holding goggle strap in center position and not slide off, up or down, and an upper rear exhaust vent set designed to accommodate all five shell sizes. Vent is fragile under crash impact, but more durable against smaller contact. It has the same three basic chin intakes, two under peak intakes, six upper exhaust and two lower exhaust. The eye port trim and material has molded rubber trim across the top of the eye port, standoff ribs that help reduce liner wear from goggles while also providing a small gap for airflow and molded goggle strap guides at either side of the eye port trim.
Red and black material accent colors for a tri-color interior
Emergency Cheek Pad Removal strap label design for easier use: label acts as pull tab for strap
Meets or exceeds Snell and D.O.T. standards
*DON’T FORGET TO PROVIDE US WITH YOUR YEAR MAKE AND MODEL DURING CHECKOUT!
(Click on “message to seller” under the ship to address.) If we do not receive this information, we will contact you before any items ship out.
FAQ’s (PLEASE READ)
Where is my part shipping from?
Although we stock many of our parts in house, we do not stock all of the parts listed in our Ebay store at our location in Collegeville, PA. We have a network of over 15 warehouses throughout the US that we use to drop-ship orders as well. In most cases, this allows us to cut down on transit time if the item is available in multiple warehouses. If this is of concern, please contact us to confirm where your part is shipping from prior to placing your order.
Can I return something if I don’t like it or it doesn’t fit?
f you simply have a change of heart for any reason, yes, you can return the part (unless it is a tuner). At this time the buyer is responsible for return shipping. No restocking fee will apply. Please contact us for a Return Authorization (RA) number prior to returning the item.
If we ship you the wrong part or the part is damaged during shipping, please let us know as soon as possible and we will send a pre-paid return label and either issue a refund or send out a replacement part.
All returned items must be sent
IN THE ORIGINAL PACKAGING, IN RESALABLE CONDITION
no later than 30 days after the item is received.
WE CANNOT ACCEPT RETURNS ON TUNERS or any items that have been clearly been used or that are missing items/original manufacturing packaging.
Do you charge a restocking fee?
No, we never charge restocking fees, however if we receive a part that is damaged, missing parts or is not returned in the original packaging or in its original shape, we will charge accordingly when issuing your refund.
Why doesn’t the listing image look like my part?
SOME IMAGES ARE STOCK PHOTOS provided to us from the manufacturer and may not accurately represent the item you are purchasing. Please read the description and check the part number and fitment chart BEFORE checking out. You can also contact us directly to confirm the part that you will be receiving.
Do you offer discounts on Bulk Orders?
Please contact us PRIOR to placing your order if you plan on ordering multiples of an item and we will most likely be able to apply a discount. Not all items apply.
Will you price-match?
Yes, we will, as long as we’re able to get the part through one of our distributors and the part is available.
The price cannot violate the manufacturer’s MAP policy (Minimum Advertised Price)
We will need a link to the exact part that you are inquiring about.
Please note that the part number, color, size, model, fitment etc must match.
The part must be new and available from the seller.
The link cannot be to an auction or a Craigslist link.
The price match (if approved) cannot be combined with any other discounts.
We reserve the right to turn down a price-match offer.
PLEASE ENTER YOUR VEHICLE INFO (YEAR/MAKE/MODEL) DURING CHECKOUT (CLICK SEND MESSAGE TO SELLER UNDER SHIPING INFO) SO THAT WE CAN CONFIRM FITMENT PRIOR TO SHIPPING OUT YOUR PART. Please note that E-Bays fitment chart is not always up to date. We can confirm fitment for you.
Why don’t you ship to PO BOXES, APO’s, Alaska, Hawaii, Puerto Rico, Guam, Virgin Islands etc?
Our distributors only ship via UPS and FedEx within the contiguous United States (lower 48 states). These carriers cannot ship to any of the above listed addresses.
If it is a part that we have in house, we can ship it to a PO BOX, as well as a location outside of the contiguous US, but there may be an additional cost associated with this shipment depending on the part itself.
Please contact us prior to making a purchase to see if we can ship your item to a PO BOX or a location outside of the contiguous US.
IF WE RECEIVE AN ORDER WITH AN ADDRESS OUTSIDE OF THE CONTIGUOUS US, WE WILL REQUEST A PHYSICAL STREET ADDRESS WITHIN THE CONTIGUOUS AND ISSUE A FULL REFUND IF WE DO NOT RECEIVE ONE BY THE END OF THE DAY.
Why is my country excluded from the Shipping locations?
We use Ebay’s Global Shipping program to handle our International shipments. We ship the parts to their HUB in the United States and the Global Shipping program handles everything from there. The Global Shipping program controls which parts ship to which countries. Unfortunately, we have no control over this decision.