6XD sequential dogbox, Sequential gearbox, Sequential transmission

Description

RTS  Inc.  /  Race  Tech  Service
Research us on Instagram:
RTS_racetechservices
6XDGEARBOX
Test Proven 1800+ hp/Ftlbs
6XD
S
equential Transmission
4 or
5 or 6 speed
“Worlds Strongest Sequential @ 1800+ftlbs”
Over 200
ratios
available
–
Any
shifter
handle
setback
option
of
16
” – 32”
* Delivered
to
you
100%
RACE
READY
@
800
+S/H
480.00
6XD
SPECS
includes
5XD
&  4XD
version
:
Delivered
100% RACE
READY to Install !
Bolts direct into any current Tex, G101, GSR, Andrews A431, Hewland TA applications (
trans mount different
)
Use the current 4spd dogbox slip-yoke driveshaft
Shifter handle setbacks 16 - 32”
ALL Internals pressure feed oil via A.R.E. pump
200+ ratio combinations in stock here in USA
8 minute (1) drop-gear swap changes ratio stack taller/shorter for different tracks & race series
Comes standard w/26 or 29 spline x 6.600" input shafts
Approx.
Wght
-118lbs - 124lbs
L
- 22.5”
W
- 9”
H
- 10”
ALL proper dogbox racing transmissions like the RTS/Gforce G101A, GSR,
6XD
sequential gearbox have a double flat roller bearing in the tail housing to eliminate driveshaft slip
yoke parasitic
drag loss, all the while handling much higher torque loads than the old school Clevite bushings. The double flat roller requires a “
Hardened Slip Yoke
”,
this yoke is required for ANY dog-box style transmission!
RTS/Gforce G101A, GSR,
6XD
6 speed sequential
dog-boxes have an output shaft that is *32 spline to handle maximum power transfer, ALL racing Dog-boxes require a "
Hardened slip yoke
”
for the front of your drive-shaft you are running."
You can also purchase this “
Hardened Slip Yoke
” direct from us;
the additional cost is only 0.00
6XD
Standard Input Shafts Included:
26 spline x 1.125” diameter x 6.660” length
29 spline x 1.250” diameter x 6.660” length
6XD
CUSTOM Input Shafts:
(
These are additional
0
)
10 spline x 1.125 diameter 6.660” length
10 spline x 1.375 diameter x 6.660” length DRAG RACING
14 spline 2JZ x 1.200” diameter x 10.600 EOS and 11.400 EOP (
LONG input
*Used with Toyota V160 style Bell Housing*)
14 spline 2JZ x 1.200” diameter x 6.660” length
NEW!
(used w/ RTS 2JZ J2 bell hsg & RTS cnc Mounting plate)
26 spline 1.125” RX7 series
Special CUSTOM Bell Housing CnC Adaptors for listed engines to
6XD
Sequential Dogbox
:
(
Additional 5
)
2JZ (Used with Toyota V160 style Bell Housing using
LONG 11.400” input shaft
)
RB / SR series (Used with the RB or SR Automatic Bell Housings)
VG35
RX7 (.750” and 1.000” thick versions both to be used with the Turbo II Bell housing)
USA Ground SHIPPING: 480.00 to ship ANYWHERE in USA (
Continental 48 states
)
***
International Clients email us for current shipping Quote regarding your country and province or state
***
IMPORTANT NOTICE:
In the COMMENTS box before you pay for item, PLEASE MAKE SURE YOU LIST RATIO STACK YOU WANT and SHIFTER SETBACK YOU DESIRE!
This will SAVE ALLOT of time processing your orders.
Thanks for Visiting Our Page, We GREATLY appreciate your Business and Trust regarding the past 300+ dogboxes sold.
RTS INC
703-B Mooresville Rd
Kannapolis, NC. 28081
714 290 5276 voice mail / Text system
Check us out on Instagram:
RTS_racetechservices
also
6XDGEARBOX