4-in-1 3.5" HD CCTV Tester for HD-CVI/HD-TVI/AHD/Analog Camera & PTZ

Description

Other testers you may also like:
4.3" CCTV IP Camera & Analog Camera Tester Monitor Video Audio PTZ PoE UTP Test
7-in Touch Screen 5-in-1 CCTV Tester IP/HD-TVI/AHD/HD-CVI/Analog CBVS Camera/Analog PTZ
7-in Retina Touch Screen 5-in-1 CCTV Tester with Cable Tracer/Toner H.265 IP/ 5MP HD-TVI / AHD/ HD-CVI / Analog camera / Analog PTZ
Remote Cable tester for RJ45 USB & BNC Connector
HD-TVI / AHD/ HD-CVI / ANALOG CAMERA / ANALOG PTZ TESTER
3.5" HVGA TFT-LCD screen display, Analog CVBS test/ HD coaxial test / PTZ control/ Color Bar Generator/ 12V 1A power output
The new HD CCTV Tester is specially designed for on-site installation and maintenance of high definition analog HD-TVI, HD-CVI, AHD cameras up to 1080p resolution and analog cameras and PTZ.
Application
CCTV system installation and maintenance
Network cabling project installation and maintenance
Dome camera and all-in-one camera testing
Video transmission channel testing
PTZ control
Features
3.5 inch screen display, 480 (RGB) x 320 resolution
Low power consumption, working time lasts 11 hours
LCD screen brightness/ contrast/ color saturation adjustable, NTSC/PAL auto adjust
AHD, HD-CVI, HD-TVI coaxial camera image display, coaxial PTZ control and call up the OSD menu
Enhanced Color Bar Generator, PAL/NTSC multi-system color bar video generator (Eight system switchable, transmit/receive eight system colorful images)
LED flashlight
HD coaxial control, PTZ control, color bar generator shortcut key
F1, F2 user-defined key
PTZ control and PTZ control analysis
Cable test, Test LAN cable or telephone cable, UTP cable, etc.; cable type and the sequence of wires will be displayed
Support more than 30 protocols, such as Pelco-D, Pelco-P, and Samsung
Support RS485, rate 600 ~ 115200 bps adjustable
Includes Lithium Ion Polymer Battery (3.7V DC 3000mAh)
Image display and data control integration Handheld, easy to carry and operate
Functions
Video signal test: view the image easily and directly from the camera.
HD coaxial signal test: HD-TVI, HD-CVI and AHD coaxial signal test, support up to 1080p.  The tester will display camera image and call up the camera OSD menu.
Video signal level test (for analog): Test video signal strength attenuation, longer video signal cable will cause the image to be dim and reduce the image dynamic range; when video signal is too strong, it will cause virtual shadow and reduce the sharpness of the image.  It can also display the video level value; if out of range, notices will be displayed on the screen.
PTZ controller: display the input video images.  Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed, set and call preset position.
Enhanced color bar generator: the tester sends out color bars via its BNC output to the monitor.  This is used when there are problems in the cable going from the camera back to the monitoring area.
DC12V 1A output power: power DC12V camera from the tester when power supply is not available.
Audio testing: test the audio input from pickup devices.  Connect the tester and audio pickup device with the included audio cable.
PTZ controller: search the control protocol code from the Multifunction keyboard or DVR by RS485 interface, test the PTZ control command data when receiving anomaly of RS485 data transmission.  Screen displays 16 hexadecima codes such as: PELCO-P: A0 00 (Add) xx xxxxxx AF xx; PELCO-D: FF 01 (Add) xx xxxxxxxx
PTZ Address scanning: search ID of PTZ camera.  Helps search the speed dome address quickly.
LED lamp: Press the LED On/Off button to use the LED flashlight.
HD coaxial, PTZ control and color bar generator shortcut key for easier use
Specifications
Model
HD CCTV Tester MX35HDATC
Video Test
Signal mode
NTSC/ PAL (auto adjust)
Display
3.5 inch digital TFT-LCD, 480 (RGB) x 320 resolution
LCD Adjustment
Brightness, Contrast, Saturation
Video IN/OUT
1 Channel BNC Input
1 Channel BNC  Output
Video Output Mode
1.0 Vp-p
Video Level Test
Level Test
Video signals measured in IRE or mV (for analog)
PTZ Controller
Communication
Support RS485
PTZ Protocol
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Linin, Yaan, etc.
Baud Rate
600, 1200, 2400, 4800, 9600, 19200, 57600, 115200 bps
Video Signal Generation
Color Bar Generator
Output one channel NTSC/PAL color bar video signal for testing monitor or video cable (red, green, blue, white, and black color)
UTP Cable Tester
UTP cable test
Test UTP cable connection status and display in the screen
Power Output
DC12V 1 Amp for camera
Audio Input Test
Yes
RS485 Data Analysis
Data monitor
Captures and analyzes the command data from controlling device
HD-CVI Video Test
HD-CVI video signal test
1 channel for HD-CVI in (BNC interface) support 720p 25/30/50/60fps, 1080p 25/30fps, camera OSD menu control over coaxial cable
HD-TVI Video Test
HD-TVI video signal test
1 channel for HD-TVI in (BNC interface) support 720p 25/30/50/60fps, 1080p 25/30fps, camera OSD menu control over coaxial cable
AHD Video Test
AHD Video signal test
1 channel for AHD in (BNC interface) support AHD 2.0 version,  720p 25/30fps, 1080p 25/30fps, camera OSD menu control over coaxial cable
Power
Power Adapter
DC 5V (1.5A)
Battery
3.7V Lithium polymer battery, 3000mAh
Rechargeable
After charging 3-4 hours, working time lasts 11 hours
Low Consumption
Energy saving technology
Battery icon real-time display
General
Operating setting
English/Chinese and other languages OSD menu
Auto off
5-60 minutes
Keypad tones
On/Off
Operating Temperature
-10ºC ~ 50ºC
Humidity
30% ~ 90%
Dimensions (mm)
194 x 112 x 48
Weight
540g
Packing list
Items included:
HD CCTV Tester x1
Power adapter x1
USB cable x1
Power cable x1
Audio cable x1
RS485 cable x1
BNC cable x1
Safety cord x1
Cable tester x1
Lithium ion polymer battery x1
Tool bag x1
Tool bag strap x1
Manual x1